Usage and operating procedures of single beam gantry crane

As a manufacturer of single girder cranes in Shandong, today I will introduce the usage and operating procedures of single girder gantry cranes. Interested friends, let's learn about it together:

1. Drivers must strictly comply with the shift change system of single beam gantry cranes and carry out various handover tasks.

2. Single beam gantry crane drivers should fully understand and master the performance and operation of single beam gantry cranes, and be able to control them reasonably and implicitly according to the actual situation of lifting heavy objects.

3. The driver needs to inspect the single beam gantry crane of the enterprise, starting from most long-term situations, and then conducting trial runs of various parts of the empty vehicle to carefully check the sensitivity and coordination of each part.

4. Especially on the basis of stability and speed mentioned above, the driver should try to avoid shortening the working time as much as possible during the operation process, in order to ensure the continuous operation of the single beam gantry crane and improve work efficiency.

Standard operating procedures for single beam gantry cranes:

1. Familiar with the full technical operating procedures for single beam gantry cranes.

2. When the crane approaches the crane of the same span.

3. When not working, it is necessary to park the crane in the designated position and securely fix it by cutting off the power supply.

4. The transition time for each gear of the individual operating mechanism should not be less than level Y or it should stop working unless it rains. When changing the direction of operation and handing over shifts in all normal work.

5. The above standards are applicable to the full technical operation of the double beam bridge crane of the operating company. The lifting can only be carried out under the guidance of the chief engineer, especially on site, and under the supervision of all personnel.

6. Shutdown precautions: After completing the operation, the alarm should sound continuously when starting up.

7. This standard specifies the relevant regulations for the full technical operation of a single beam gantry crane. Operators must be trained and certified before taking up their posts. All lubrication parts should be regularly oiled to ensure good lubrication.

8. Prohibit the crane from temporarily staying at high altitude with heavy objects in mid air.

9. When the crane is approaching in mid air, it should work in principle to avoid collisions between the three hooks. Before operation, it is necessary to check with the main switch disconnected to confirm that most of the operating handles are in the zero position and that there are no obstacles to the operation of the crane in the direction of each section before closing.

The above content is compiled by the editor of Shandong single beam crane manufacturer. If you want to learn more about sustainability, please follow this website.