How to choose the working speed of a single beam gantry crane?

Many customers have a question when choosing a single beam gantry crane: what is the appropriate working speed for the crane? In fact, the working speed of a single beam gantry crane is affected by many factors. Next, the Shandong gantry crane manufacturer will take you to understand how to choose the working speed of a single beam gantry crane.

1、 What affects customers' choice of single beam crane speed is the usage scenario: if the crane has no special purpose, a medium speed crane should be selected; If the purpose of the crane is for assembly or maintenance installation, low-speed or micro speed cranes should be selected; In addition, when the crane is fully loaded or overloaded, choose low speed. When the crane is unloaded or lightly loaded, choose high speed.

2、 The point to pay attention to is the working stroke: when the working stroke of the crane is relatively large, a relatively high speed is usually selected; When the work schedule is relatively small, a lower speed is usually used.

3、 When choosing the working speed of a crane, attention should also be paid to the working nature of the crane. If the crane needs to work frequently or has high productivity requirements, high-speed is usually chosen; For use on production lines or continuous production with a rhythm, it is necessary to ensure that the speed of equipment operation is in line with the pace of production; However, for non working sports equipment or equipment that only performs adjustment work with fewer runs, low speed is usually used.

4、 The working speed of the selected single beam crane depends on the actual lifting capacity of the equipment during operation. Under normal circumstances, if the lifting capacity during actual operation is relatively small, high speed should be used, otherwise low speed should be used, especially when both the main and auxiliary lifting mechanisms are present. The speed of the auxiliary lifting mechanism is generally significantly higher than that of the main lifting mechanism.

Regardless of whether the customer chooses high or low speed, the principle is to operate the crane in a stable speed working section to prevent the unstable operation of slowing down immediately before accelerating.

The above is the content compiled by the Shandong Longmen Crane Manufacturer's editor for everyone. If you want to learn more about sustainability, please follow our website.