How to ensure the safe installation of a single beam crane:

Single beam gantry crane is a variation of bridge crane, also known as gantry crane. Mainly used for loading and unloading operations of outdoor cargo yards, material yards, and bulk cargo. The bridge frame of a single beam gantry crane runs longitudinally along the tracks laid on both sides of the elevated platform, making full use of the space below the bridge frame to lift materials without being obstructed by ground equipment. Next, the Shandong gantry crane manufacturer will explain how to ensure the safe installation of single beam cranes:

1. When lifting, it should maintain a stable upward movement and not sway arbitrarily. To enable human control, ropes can be tied at both ends of the crane.

2. Use a winch and mast to thread the rope into the lifting hole for lifting.

3. Set the mast in the middle of the main beam of the single beam gantry crane, slightly close to the heavier main beam side, so that the lifting crane will not tilt, and firmly tie the electric hoist to the main beam while lifting.

4. When lifting the crane beyond the track, pull the rope to twist the crane and gradually lower it so that the crane's wheel groove aligns with the track and slowly descends.

5. Lift the single beam gantry crane to the appropriate height, fix the control room to the connecting frame and the connecting seat with bolts, and then weld the connecting seats to the main beam and the crossbeam according to the random drawings.

The above are several issues that need to be noted and the correct installation method when installing a single beam gantry crane. I hope that users and friends can follow this method to install the crane and improve the safety of crane operation.